Innokin Plexus Replacement Pods

Description - Innokin Plexus Replacement Pods

These are genuine Innokin Plexus replacement pods: refillable 2ml cartridges with integrated mesh coils, built specifically for the Innokin Plexus Pro and Plexus Go tube-style kits. Each pack contains two pods and comes in three resistances (0.6ohm, 0.8ohm, and 1.2ohm), covering a tight cigarette-style MTL draw right through to a slightly looser, airier pull. The 360-degree clear shell lets you check your e-liquid level at a glance, and the top-sliding refill port keeps top-ups fast and drip-free. At £3.79 per two-pack, they're priced below RRP, with free UK delivery on orders over £50.

Replacing your Plexus pods regularly is one of the simplest ways to maintain consistent flavour and avoid the burnt taste that signals a coil has reached the end of its life.

Introducing the Innokin Plexus Replacement Pods

Designed to sit inside the Plexus Pro and Plexus Go kits, these pods combine a 2ml TPD-compliant capacity with integrated mesh coils for clean, consistent flavour delivery. There's no separate coil to fit and no complicated setup. Fill, wait, vape.

The three resistance options mean you can match the pod to your preferred draw style and nicotine strength, rather than settling for a one-size-fits-all approach. The 0.6ohm dual mesh suits vapers who want a warmer, slightly airier pull. The 0.8ohm sits in the middle ground. The 1.2ohm delivers a tight, cooler draw that's closest to the feel of a cigarette.

One compatibility note worth knowing before you buy: the 0.6ohm dual mesh pod is compatible with the Plexus Pro only. The 0.8ohm and 1.2ohm pods work across both the Plexus Pro and the Plexus Go. Getting this wrong is the most common purchasing mistake with this product, so check your device model first.

These pods suit everyday MTL vapers, switchers stepping away from cigarettes or disposables, and existing Plexus kit owners who simply need to restock. Browse the full Innokin collection if you're also looking at hardware.

Why Choose the Innokin Plexus Replacement Pods?

• Pod type: Refillable cartridges with integrated mesh coils. No separate coil to install.
• Capacity: 2ml, fully TPD-compliant for UK use.
• Resistances available: 0.6ohm dual mesh, 0.8ohm mesh, 1.2ohm mesh.
• Vape style: MTL across all three resistances, with the 0.6ohm offering a slightly looser draw that edges toward light RDL (restricted direct-to-lung).
• Compatibility: Plexus Pro and Plexus Go. The 0.6ohm dual mesh pod fits the Plexus Pro only. The 0.8ohm and 1.2ohm work with both kits.
• Refill system: Top-sliding port for clean, drip-free top-ups without removing the pod from your device.
• Visibility: 360-degree clear body so you can monitor liquid level without guessing.
• E-liquid compatibility: Best paired with 50/50 freebase or nic salt e-liquids.
• Ideal for: Everyday MTL vapers, switchers from cigarettes or disposables, and Plexus kit owners wanting a reliable pod replacement.

The integrated mesh coil design delivers consistent flavour from the first puff to the last, without any fiddly installation or priming complications beyond a short wait before your first use.

Compatibility and Performance

• Compatible kits: Innokin Plexus Pro and Innokin Plexus Go.
• 0.6ohm dual mesh: Recommended wattage 20-25W. Slightly looser MTL or light RDL draw. Plexus Pro only.
• 0.8ohm mesh: Recommended wattage 13-16W. Balanced, mid-tight MTL draw. Compatible with both kits.
• 1.2ohm mesh: Recommended wattage 10-13W. Tighter, cooler MTL draw. Compatible with both kits.
• E-liquid type: 50/50 freebase or nicotine salt e-liquids. High-VG shortfills are not recommended as the thicker consistency restricts wicking and shortens coil life.
• Output style: Smooth, flavour-forward vapour consistent with MTL vaping. Not suited to cloud-chasing or sub-ohm direct-to-lung (DL) use.
• Capacity: 2ml per pod, the UK TPD legal maximum.
• Charging: Not applicable. These are replacement pods only. Charging is handled by the Plexus Pro or Plexus Go device itself.

Matching the right resistance to your draw preference and nicotine strength means more satisfaction from every refill, and it protects the pod from running hotter than it's designed to. The wattage ranges above are the manufacturer's recommended figures; staying within them gets the best flavour and the longest coil life.

Choosing the Right Resistance

The three resistance options suit different draw styles and nicotine habits. Use this as your starting point.

0.6ohm dual mesh (Plexus Pro only)

• Draw style: Slightly looser MTL or light RDL
• Best with: Lower-strength nic salts (5-10mg) or 3-6mg freebase
• Best for: Vapers who want a warmer, airier draw and prefer lower nicotine concentrations

0.8ohm mesh (Plexus Pro and Plexus Go)

• Draw style: Balanced, mid-tight MTL
• Best with: 10mg nic salts or 6mg freebase
• Best for: Moderate smokers, roughly 6-14 cigarettes a day, who want a familiar and satisfying pull

1.2ohm mesh (Plexus Pro and Plexus Go)

• Draw style: Tight, cigarette-style MTL
• Best with: 20mg nic salts or 12mg freebase
• Best for: Heavier smokers (15 or more cigarettes a day) or anyone stepping away from cigarettes or disposables who needs a strong nicotine hit

Not sure whether to use nic salts or freebase? Nic salts are formulated for higher strengths, up to the UK legal maximum of 20mg, and deliver a smoother throat hit than freebase at the same concentration. They're the better choice for heavier smokers and anyone using a tight MTL setup like the 1.2ohm pod. Browse our nic salt range or 50/50 freebase e-liquids to find the right pairing for your pod.

Innokin Plexus Pod Highlights

Genuine Innokin pods built for consistency, ease of use, and clean flavour across the Plexus range.

• Integrated mesh coils for smooth, consistent flavour from the first draw
• Three resistance options covering tighter MTL through to light RDL
• Top-sliding refill port for fast, drip-free top-ups without removing the pod from your device
• 360-degree clear body so you can check your liquid level at a glance
• 2ml TPD-compliant capacity, legal for UK use
• Compatible with Plexus Pro and Plexus Go (0.6ohm is Plexus Pro only)
• Works with 50/50 freebase and nic salt e-liquids, covering a wide range of nicotine strengths

The top-sliding refill is worth highlighting separately. Most pod systems require you to pull the pod out of the device to fill it, which creates the opportunity for leaks and spills. The Plexus top-slide means you open the port, fill, close, and carry on. It's a small detail that makes a genuine difference when you're refilling on the go or at your desk.

Ready to restock? Order your Innokin Plexus replacement pods from Vaping 101 and get same-day dispatch on orders placed before 2:30pm Monday to Friday. Standard UK tracked delivery starts from £3, or free on orders over £50, with next-day options via DPD available for most UK postcodes. Every order earns reward points at 50 points per £1 spent, and we'll match any lower price found on a genuine UK site. Browse the full Innokin collection or explore our complete replacement pods range to find everything you need.