Coilology Alien is 100% HANDCRAFTED in the whole procedure, created with triple parallel wires, wrapped in a de-cored and stretched Clapton that is wound to produce the wavy look.
Due to this configuration, the surface tension of the liquid is fully taken advantage of by making the coil. This coil sucks juice off of the wick with capillary action created by its wire .Without breaking your budget, Coilology Alien coils provide out of this world E-Liquid flavour and cloud production.
Contents:
You will receive:
1 Set of alien coil (2 coils)
1 Piece of Organic Japanese Cotton
1 Plastic Container
| Item |
Specifications |
| Wire Configurations |
ID
Φ/mm |
Resist Ω/Coil
|
| KA1 |
Ni80 |
SS 316L |
| Alien |
3-26/36 |
3 |
0.28Ω |
0.2Ω |
0.14Ω |
| 3-27/36 |
3 |
|
0.14Ω
|
|
| 3-27/36 |
3.5 |
|
0.16Ω
|
|
| 3-28/36 |
2.5 |
0.23Ω |
0.16Ω |
0.15Ω
|
| 3-28/36 |
3 |
|
0.19Ω
|
|
| 3-28/40 |
3.5 |
|
0.19Ω
|
|
| 3-28/40 |
4 |
|
0.22Ω
|
|
Warning:
Our Coils are intended for EXPERIENCED users only.
Coil resistances may vary slightly depending on the RDA/RTA and how accurately the mod reads the coils. Length of the leads go in to post holes will effect the resistance as well. All our coils have been tested several times to get the most accurate reading possible.
Knowledge on battery safety and ohms law is strongly recommended. Use at your own risk. Coilology Co,. Limited and retailers are NOT responsible for injury or damage caused to property or person due to misuse of our product.
