How to Fill OXVA Xlim Pro 2 DNA Pods
The OXVA Xlim Pro 2 DNA uses the Xlim SS stainless steel pods, which are filled differently to some other pod kits on the market. They use a side-fill port rather than a top-fill design, and because the DNA chipset is sensitive to coil condition, getting the fill and priming process right matters more here than it does on a standard pod kit. This guide covers exactly how to fill the pods, which e-liquids work best with each resistance, and what to do to get the best performance from every fill.
Which Pods Does the Xlim Pro 2 DNA Use?
Before filling anything, it is worth being clear on pod compatibility. The Xlim Pro 2 DNA is exclusively compatible with Xlim SS stainless steel pods, which come in 0.6ohm and 0.8ohm options. Standard Xlim V2 or V3 pods will not activate the DNA chipset's temperature control or anti dry-hit features, even if they fit the device physically. If you want the full benefit of the DNA chipset, the SS pods are the only option.
The Xlim SS pods have a clear body, which makes it easy to monitor your e-liquid level without removing the pod from the device. They also last over 30% longer than standard Xlim pods, which makes keeping them properly filled and primed a worthwhile habit.
How to Fill OXVA Xlim Pro 2 DNA Pods
Filling guideHere is the full filling process from start to finish:
Remove the pod from the device by pulling it upward out of the magnetic connection.
Locate the side-fill port. It sits on the side of the pod body and is sealed with a small rubber plug.
Pull out the rubber plug carefully. Do not use anything sharp to do this as it can damage the seal.
Insert your e-liquid nozzle into the fill port at a slight angle. Angling the nozzle reduces the chance of air bubbles forming inside the pod as you fill.
Fill slowly and steadily until the e-liquid reaches just below the maximum fill line. The clear pod body makes it easy to see the level as you go.
Stop before the fill line. Overfilling pushes excess liquid into the airflow path and is one of the most common causes of leaking and gurgling on this pod.
Reseal the fill port by pressing the rubber plug firmly back into place. Make sure it is fully seated with no gaps around the edges.
Wait five minutes before vaping. This is the priming period. Skipping it on a brand new pod is the most reliable way to get a burnt first draw, even with the DNA chip's anti dry-hit protection active.
Reinsert the pod into the device until it clicks magnetically into place.
For subsequent refills on a pod already in use, the priming wait can be reduced to two to three minutes rather than the full five.
Which E-Liquids Work Best with Xlim SS Pods
Getting the e-liquid right for each pod resistance makes a noticeable difference to both flavour quality and pod lifespan.
The 0.8ohm pod is designed for mouth-to-lung vaping and performs best with 50/50 PG/VG nic salt e-liquids at 10mg or 20mg. The higher PG content wicks efficiently through the tighter coil structure and delivers a clean, precise flavour hit that suits the MTL draw style well. Running a high-VG liquid through the 0.8ohm pod can cause slow wicking and dry hits even with the DNA protection active.
The 0.6ohm pod suits a more open restricted direct lung draw and handles both nic salts and freebase e-liquids. A 50/50 to 70/30 VG/PG ratio works well here. If you prefer a lower nicotine strength with more vapour production, a freebase shortfill topped up with a nic shot is a practical option for this pod.
If you are looking for a reliable nic salt to pair with either pod, the OXVA collection at Vaping 101 includes compatible e-liquid options suited to the Xlim range.
Common Filling Mistakes to Avoid
A few habits that will help you get consistent results from every fill:
Never fill a pod while it is still seated in the device. Removing it first prevents any accidental spills from reaching the device's connection point. If e-liquid does get onto the magnetic connection pins, wipe them dry with a tissue before reinserting the pod.
Avoid shaking the device aggressively after filling. The side-fill design is secure when the rubber plug is properly seated, but unnecessary movement immediately after filling can introduce air bubbles into the coil before it has fully saturated.
Do not vape the pod all the way to completely empty before refilling. Letting the e-liquid level drop below the coil intake before topping up increases wear on the stainless steel coil and reduces overall pod lifespan. Refilling when the level reaches roughly a quarter full keeps the coil in better condition over time.
Pick Up Xlim SS Pods at Vaping 101
The full range of OXVA Xlim SS stainless steel pods is available at Vaping 101 in both 0.6ohm and 0.8ohm, alongside the OXVA Xlim Pro 2 DNA pod kit itself. Browse the complete OXVA collection for everything in the range.
OXVA Xlim Pro 2 DNA Pod Kit
Quick Comparison
| Pod / option | What it is | Best for | E-liquid type | Resistance | Shop |
|---|---|---|---|---|---|
| Xlim SS 0.8ohm Pod | Stainless steel MTL pod | Tighter MTL vaping | 50/50 PG/VG nic salts | 0.8ohm | Xlim SS pods |
| Xlim SS 0.6ohm Pod | Stainless steel RDL pod | More open restricted direct lung draw | 50/50 to 70/30 VG/PG | 0.6ohm | Xlim SS pods |
| OXVA Xlim Pro 2 DNA | DNA-powered pod kit | Using Xlim SS pods with DNA features | Device kit | Compatible with SS pods only | Xlim Pro 2 DNA |
| OXVA | Full OXVA collection | Browsing OXVA kits and pods | Kits and pods | OXVA range | OXVA |
Frequently Asked Questions
The Xlim Pro 2 DNA is exclusively compatible with Xlim SS stainless steel pods. Standard Xlim V2 or V3 pods will not activate the DNA chipset's temperature control or anti dry-hit features.
Remove the pod from the device, open the side-fill rubber plug, insert your e-liquid nozzle at a slight angle, fill slowly to just below the maximum fill line, reseal the plug firmly, then wait five minutes before vaping on a new pod.
The 0.8ohm pod performs best with 50/50 PG/VG nic salt e-liquids at 10mg or 20mg. It is designed for mouth-to-lung vaping.
The 0.6ohm pod suits a more open restricted direct lung draw and works well with both nic salts and freebase e-liquids. A 50/50 to 70/30 VG/PG ratio works well.
The full range of OXVA Xlim SS stainless steel pods is available at Vaping 101 in both 0.6ohm and 0.8ohm, alongside the OXVA Xlim Pro 2 DNA pod kit.
