OXVA XLIM PRO 2 DNA × Escribe Software Tutorial

Welcome to the ultimate guide on using your OXVA XLIM PRO 2 DNA with Evolv's Escribe Software. Whether you're just getting started or you're an advanced user looking to fine-tune performance, this step-by-step tutorial will walk you through installation, setup, and full customization of your device.

🔧 Step 1: Install Escribe Software

Before doing anything, make sure you have the latest version of the Escribe software. You can download it from:

• EVOLV Official: https://www.evolvapor.com/escribe

• OXVA Official: https://www.oxva.com/pages/xlim-pro-2-dna

💡 Tip: Always choose the version that matches your operating system for the best compatibility.

🔌 Step 2: Connect Your Device

Use the USB cable that comes with your XLIM PRO 2 DNA to connect it to your PC. Ensure that the cable supports data transfer (not just charging).

Once connected, the device should be recognized by the Escribe software automatically.

🖥️ Step 3: Explore the Escribe Interface

Upon successful connection, you'll see various tabs in the Escribe software. Each tab allows you to customize different aspects of your device. Here's a breakdown:

⚙️ 3.1 General Settings

Set:

• Power output

• Boost level (initial power burst)

• Warmth per coil resistance

⚠️ Only adjust wattage within your pod's safe range.

🔒 3.2 Safety Settings

Configure:

• Max puff duration (recommended: 7–10 seconds)

• Button lock types

• Auto-lock time to avoid accidental firing

💡 3.3 Display Settings

Adjust:

• Brightness

• Screen timeout

• Auto-dim features

🟢 Lower brightness helps conserve battery life.

🎨 3.4 Theme & Colour Schemes

Customize:

• Fonts

• Error icons

• LED animations

✅ Keep it simple for better readability and performance.

🌐 3.5 Language Settings

Edit display messages like:

• “No Atomizer”

• “Low Battery”

Great for branding or multilingual support.

🔬 3.6 Research

Advanced users can:

• Set puff count limits

• Cap energy usage

• Enable time-based vaping control

⚠️ Leave off unless you're running tests.

📊 3.7 Device Monitor

Track real-time data:

• Voltage

• Resistance

• Puff duration

• Charging behavior
  Click “Record” to log data during sessions.

💾 Step 3.8: Save & Apply Settings

After customization, you need to sync your changes:

1. Click “Connect and Download Settings” to pull in the current setup.

2. Make your edits.

3. Click “Upload Settings to Device” to apply them.

❗ Skipping this will result in your changes not taking effect on the device.

🔁 Step 4: Restore or Reset Settings

If something goes wrong or you just want a clean slate:

• Go to the General tab and click “Restore Defaults” to reset all settings.

• Do not confuse this with “Reset Statistics” in the Research tab, which only clears usage data.

❓ Need Help?

If you experience any issues:

• 📞 Phone: 01224 032542
• 🌐 Web: www.oxva.com or www.evolvapor.com
• 💬 Help Center: Accessible directly in the Escribe software under the Help tab
• ❓ Vaping 101 Help: Our team at Vaping 101 is fully trained on the new software and ready to assist you. Contact us anytime at info@vaping101.co.uk.

We're here to ensure your OXVA XLIM PRO 2 DNA delivers the best vaping experience possible.